A: Equipment on a stationary work table, The first inspection
equipment is damaged.
1. Frame material rod lock in equipment fixing plate(Such as
2. Manual test runner(Z). Confirm the equipment running smoothly,
Without getting stuck is like
3. Power on(220V).Mode switch(c) to the inch.Touch switch(B)
Confirm the equipment normal action,Shutdown.Ready to charge.
4. Element into the feeding track(F),Into
gear(G,G1).(G1)Responsible for cutting off the tape,(G)Element into
a molding plate(I);
5. (G)gear Close to Forming wheel(I).With components for the feed
track movable. Element to be in the middle of the gear.
6. According to the element size adjust the molding plate
position.this change lead to gear and Stainless steel to be change.
B. Apparatus for molding process description:
1. When the element is formed by molding plate served when the
microswitch.Fretting switch, Element one by one into the molding
2. When the microswitch is no element, Motor stop immediately.
3. Element operation to the cutter. Element foot assembly cut set
Length set by(N)(P),Adjustment of required length.
C. Forming machine for adjusting method
1.Element to the molded mould seat(M0)(J0)For processing molding
2.Element forming position after delivery,Slide bar(M4) The
components of foot pulled into type U,Impact connecting rod(J1)and
Impact block(M5) Installed components forming
3.This machine is a customized equipment,Dimensions for fixing.
1. Power 220V. Please power off the machine control
2. Please arrange for professionals to operate
3. Open the power supply before, please hand test machine
4. If the device to rotate the resistance is too large, please stop
5.Beware of mechanical wounding
6.Every day to clean the machine.
" U " type
2. Molding specifications
" K " Type